Prevent Ice Dams from Forming on Your Roof With Heating Roof Cables

Heat Trace Cables for Ice Dam Prevention - Engineered Roof Deicing

Engineered Roof Deicing’s Heat Trace Cable is perfect for heating your roof and/or gutter with our roof deicing cable technology or with your other outdoor heating products. The roof heat cable is designed to serve the most demanding environments, including hazardous and non-hazardous areas, as well as areas where corrosives may be of concern.

Heat Trace Cable is designed to maintain temperatures up to 150°F (65°C) and can withstand temperatures up to 185°F (85°C). Our roof heating cables are certified to all applicable CSA (CUS) standards for use throughout North America. It is suitable for metallic and non-metallic roofs, pipes, gutters, tanks and vessels.

Title
Button
Title
Button

How Can Roof Heat Cables Assist You?

HEAT CABLE INSTALLATION GUIDE

Does your area often get 6 in. or more of snowfall per storm?

While heat cables can be a great solution for some situations, homeowners should be careful spending money on a product that may not be effective for their problem. Sometimes, a more intuitive solution is necessary.

Zig-zag cables may only be useful when:

• Automatic Activation means Lower Deicing Costs

• Reliable Rain and Snow Detection

• Full 30A @ 240 VAC Control

• Field Strap for 100-120/200-240 VAC Operation

• Replaceable Remote Precipitation Sensor

• Easy Installation, Full Access to Electronics

• Safe Low-Voltage Sensor Head

• Adjustable Temperature Trigger Point

• Adjustable Delay Off Cycle

• Bright Off/On/Triggered LED Status Indicator

• Smart “Manual On” Operates for One Delay Cycle

Our professionals are here to help you find the right product for your roof. Roof heating cables are a useful tool in the right circumstances, but they should be used as a last resort when you have exhausted other options. Contact our team today to learn more about our cables and ice dam prevention products! We're proud to help homes and businesses across the nation.

Contact Us to Learn About Your Roof Heat Cable Options

120 Volt

• ECD-1205 120V 5 watts per foot

• ECD-1206 120V 6 watts per foot

• ECD-1208 120V 8 watts per foot

• ECD-12010 120V 10 watts per foot

240 Volt

• ECD-2405 240V 5 watts per foot

• ECD-2406 240V 6 watts per foot

• ECD-2408 240V 8 watts per foot

• ECD-24010 240V 10 watts per foot

National Electrical Codes both require ground-fault protection of equipment. Ground-fault protection of components and each heating cable branch circuit reduces the danger of fire caused by continuous electrical arcing, resulting from improper installation or damage to the heating cable. The following are some of the ground-fault breakers that satisfy this equipment protection requirement: Square D Type QOB-EPD or QO-EPD and Cutler Hammer (Westinghouse) Type QBGFEP.